Tektronix 070-9176-00 Instruction Manual Download Page 54

Page: 54 / 85

Performance Verification

P6467 High-Speed Probe Adapter Instruction Manual

NOTE

. The P6467 Application Support software includes a predefined setup that

you can restore and use with the following setups. To use the predefined setups,
select the Save/Restore menu and restore the setup file named P6467_PVD.
Otherwise continue with the following steps to manually set up the logic
analyzer.

5. Select the Sys Config menu and perform the following steps:

a. Select a Module formation with two individual 92A96 Modules.

b. Change the module names to module_a (module_a should be the 92A96

module in the lowest numbered slot in the logic analyzer) and
module_b.

Select F6: DEFINE CLUSTER and define a cluster named P6467
containing the two 92A96 Modules.

6. Select the Clus Setup menu and perform the following steps:

a. Select F4 DEFINE CORRELATN and correlate the two 92A96

Modules (select module_a in the Correlate field, select F7: ADD COR,
select module_b in the new field, and save the changes).

b. Select F2: DEFINE SIGNAL and select F7: ADD SIGNAL.

Define a signal AtoB with the module_a Direction field set to Output
and the module_b Direction field set to Input.

d. Select F7: ADD SIGNAL and define a second signal BtoA.

Set the module_a Direction field to Input and the module_b Direction
field to Output.

Save and close the overlay and verify that the Clus Setup menu displays
the signal definitions.

7. Select the module_A Config menu and set the Acquisition Memory field to

32768 cycles.

8. Select the Channel menu and perform the following steps:

a. Select F5: DEFINE THRESHOLD to call the Threshold Definition

overlay.

b. Change the Clock Threshold field to VAR –1.85 V.

Change the Data Threshold field to VAR +1.95 V.

d. Save the changes and close the overlay.

Delete the Address group from the Channel menu.

Summary of Contents for 070-9176-00






















































































Search results

Summary of Contents for 070-9176-00

Reviews:

Brands by name

Popular brands

Tektronix 070-9176-00, Instruction Manual

Search results

Summary of Contents for 070-9176-00

Reviews:

Brands by name

Popular brands