manualshive.com logo in svg

Tektronix 070-9176-00, Instruction Manual

Share
Download
Tektronix 070-9176-00 Instruction Manual Download Page 29

Getting Started

14

P6467 High-Speed Probe Adapter Instruction Manual

3. Connect the Probe Power cable from the power connector of one of the

92A96 Modules on the logic analyzer to the power connector on the P6467
Probe (if necessary refer to Figure 5 on page 7 for information on connect-
ing the Power cable).

4. Power on the logic analyzer and the display terminal.

5. After the logic analyzer completes the power-on diagnostics, select the

Save/Restore menu and restore the setup named P6467-PVD

The restored setup has the menus already programmed for the functional
checks. If the predefined setup does not match your hardware configuration,
you will need to further modify the menus for your configuration (if
necessary, refer to the 92A96 & 92C96 Module User Manual for information
on using the setup menus).

6. Connect the two 50 

 cables to the outputs of the pulse generator.

7. Connect one of the 3 mm (SMA male-to-female BNC adapters to J1 and J13

of the P6467 Test Board.

8. Connect the two BNC cables to the 3 mm (SMA male-to-female BNC

adapters.

9. Connect the shorter BNC cable from the complement output of the pulse

generator to the clock connector (J13) on the P6467 Test Board.

10. Connect the longer BNC cable from the output of the pulse generator to the

J1 connector on the P6467 Test Board.

11. Connect the INPUT DATA A flex lead of the probe to the 30-pin connector

on the P6467 Test Board.

12. Set the pulse generator for a 20 MHz 0 V to +3 V output signal with a 50%

duty factor and a 1 to 4 ns rise time (if necessary, use an oscilloscope to
verify the setup).

13. Start the logic analyzer by selecting function key F1: START on the logic

analyzer.

NOTE

. If the logic analyzer displays a SLOW CLOCK message, check that all of

the jumpers are in the correct positions on the probe and that you have correctly
connected the clock signal from the pulse generator to the P6467 Test Board.

Summary of Contents for 070-9176-00






















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands