Teka 111000056, User Manual

Page: 140 / 264

138 User Guide
the screen and press . The time 00:00 is
displayed on the screen.
2. Select the cooking time, by pressing or
. Next, two beeps are heard, the remain-
ing time appears on the display and symbol
flashes slowly.
3. Press or until symbol flashes on
the screen and press . You will see the
expected completion time on the timer dis-
play.
4. Select the cooking end time by pressing
or . Next, a double beep is heard and the
current time is displayed on the screen.
5. Select a cooking function and temperature.
The oven will remain disconnected with
symbols
and lit up. The oven is now
programmed.
6. When it is time to start cooking, the oven
will turn on and will operate for the pro-
grammed cooking time.
7. While cooking, the remaining cooking time
is displayed and symbol flashes slowly.
8. When the set cooking time has ended, the
oven will turn off, a buzzer will sound, and
symbol
will flash quickly.
9. Press any sensor to stop the alarm and to
turn off symbol . The oven will switch on
again.
10. Set the controls to to turn off the oven.
You can change the remaining cooking time at
any time by pressing
or until symbol
starts to flash quickly. Now press to change
the time.
Cooking with MAESTRO PIZZA
To use your MAESTRO PIZZA , first preheat the
oven to the ideal cooking conditions (340 ºC).
To do so:
1. Place the oven grid on the telescopic rails
fitted inside your oven.
2. Next, place the pizza stone on the oven
grid.
3. Remove the enameled tray supplied with
the oven and close the door.
WARNING
Remember that it is very important during
the preheating to ensure that the pizza stone
has been placed inside the oven. This is to
guarantee that the pizza stone reaches the
correct temperature and the optimum cook-
ing results are obtained.
4. Turn the cooking control dial to MAESTRO
PIZZA .
5. The value 340º is displayed on the clock
screen.
6. When the OK sensor on the glass of the
front control panel is pressed, a buzzer