TECNA
S.p.A.
ITEM
TE700 Instruction
Manual
83/128
PARAMETER
PARAMETER DESCRIPTION
RANGE VALUE
SENSOR4 S/N_P2:
Part 2 sensor 4 serial n.
XXXX
SENSOR4 ID CAN:
ID CAN for sensor 4
100 – 119
DELAY ID. S4
Delay for indentation measurement
0 – 1000 mS
LINEAR SENSOR
It activates or deactivates the use of the linear position sensors. If a sensor initialization error
occurs, it automatically commutates to OFF and the error condition is signalled on the TE700
display. Sensor identification parameters are not deleted. The enabling of the position sensors
makes available the measurements relevant to the initial thickness of the sheets to be welded
and to the electrode penetration at the end of the welding procedure and relevant limits.
LINEAR SENSOR N°
It indicates the number of sensors installed on the machine. If multiple sensors are installed,
the choice of which one to use to carry out the measurement depends on the number of the
welding tool selected for the currently called weld program. For example, if 3 different welding
tools are enabled with 3 associated position sensors and the operator carries out a weld with
a program in which tool number 2 was selected, linear sensor number 2 will be used to
measure the coordinates.
SENSOR1 S/N_P1:
This parameter contains the first part of the serial number of linear sensor 1. The serial
number can be read on the sensor body.
SENSOR1 S/N_P2:
This parameter contains the second part of the serial number of linear sensor 1. The serial
number can be read on the sensor body.
SENSOR1 ID CAN:
This parameter allows the setting of the sensor identifier in the CAN network. In order to work
efficiently, the sensors present inside the CAN network must have univocal identifiers.
DELAY ID. S1
This parameter specifies the delay, in mS, that the system must wait after having finished the
welding current passage in order to measure the coordinate with which to obtain the electrode
penetration value during the welding operation.
SENSOR2 S/N_P1:
This parameter contains the first part of the serial number of linear sensor 2. The serial
number can be read on the sensor body.
SENSOR2 S/N_P2:
This parameter contains the second part of the serial number of linear sensor 2. The serial
number can be read on the sensor body.
