Instruction Manual
ITEM TE700
TECNA
S.p.A.
80/128
STEP 3 WELDS
The value of this parameter indicates the number of welds to be carried out with the program
matched to the same step.
STEP 4 PRG.
This parameter indicates the program number that the welder has to carry out and is always
coupled with the STEP 4 WELDS parameter.
STEP 4 WELDS
The value of this parameter indicates the number of welds to be carried out with the program
matched to the same step.
STEP 5 PRG.
This parameter indicates the program number that the welder has to carry out and is always
coupled with the STEP 5 WELDS parameter.
STEP 5 WELDS
The value of this parameter indicates the number of welds to be carried out with the program
matched to the same step.
The weld spots may be carried out after having activated this mode and having set the
parameters of the
PROGRAM SEQUENCES
menu as outlined above. Switch the key to
WORK position on the display to view the data of the sequences as shown in the figure
below.
WELD N.008 TOTAL 013
PROG N.003 RMS 10.45
TIME 10.0 SPOT 00050
NEXT 009 NEXTPRG 002
WELD N.008 TOTAL 013
It indicates the progressive number of the last carried out welding spot and the welding spots
total number the sequence is composed of.
PROG. N.003 RMS 10.45
It indicates the program number and the RMS current value of the last welding spot.
TIME 10.0 SPOT 00050
It indicates the welding time of the last carried out program and the spots counter value.
NEXT 009 NEXTPRG 002
It indicates the progressive number of the next spot and the program to be carried out.
SEQUENCE EXAMPLE
Let's take for example the sequence operation after having set the following values in the
parameters.
PARAMETER VALUE
STEP 1 PRG.
03
STEP 1 WELDS
04
STEP 2 PRG.
07
STEP 2 WELDS
02
STEP 3 PRG.
11
STEP 3 WELDS
06
STEP 4 PRG.
04
STEP 4 WELDS
01