Technoware EVO DSP PLUS TT 100 KVA, User Manual

Page: 9 / 140

ENGLISH
UPS EVO DSP PLUS TT 3 User’s manual
2 General Characteristics
UPS EVO DSP PLUS TT has all the advanced features, which guarantee maximum reliability and safety:

Double-Conversion ON-LINE Transformerless technology

Power stages/modules architecture (from 3 to 6 power stages/modules in a single UPS)
 Output Voltage regulation  1%

Protection from overload and short circuits

Automatic Bypass to protect from accidental overload or Inverter fault

Start-up even under Mains OFF conditions

Automatic protection when Battery is low

Automatic restart, following an automatic shut-down due to Low Battery, once AC utility power comes
back on
 Selectable Input Frequency (50/60 Hz)

Touchscreen Graphic LCD for monitoring of the Input and Output Voltages measurements, batteries
Voltage, percentage of load, frequency, alarms, overload, fault, events history and path of energy flow
and for setting all the UPS parameters

Acoustic signals of various kinds indicating alarm situations

SNMP Adapter (optional)
 EPO (Emergency Power OFF)

Communication with the computer through RS-232 and USB interfaces

Available extended autonomy by adding external Battery Boxes

Manual Bypass for maintenance

Parallel operating mode up to 2 UPS (optional)

ECO functioning Mode (selectable)

Frequency Converter functioning mode (selectable)
 High efficiency

Maximum reliability

Smart design and easy to use
3 Receipt and site selection
3.1 Site Selection
We recommend paying attention to the below points in order to choose a correct placement for your UPS:

The UPS is designed to operate in a protected environment (e.g. offices). We therefore recommend
installing it in a place with very little or no humidity, dust or smoke.

When the UPS is brought from a cold place to a warmer place, humidity in the air may cause
condensation in the UPS. In this case, allow UPS to stand for two hours in the warmer place before
beginning with the installation.