Technoware EVO DSP PLUS TT 100 KVA, User Manual

Page: 27 / 140

ENGLISH
UPS EVO DSP PLUS TT 21 User’s manual
Table 5-6: Setup General Setting List
Setting Item Sub Item Explanation
Model Name
--
Set UPS Name (xxxxxxxxxx).
The max. length is 10 characters.
Time
Adjust Time
Set current date and time.
Format: (yyyy / mm / dd hour : min : sec)
MUST be set after UPS installation
System Installed Date
Set system installed date.
Format: (yyyy / mm / dd)
2015/1/1 (Default)
MUST be set after UPS installation
System Last Maintain
Date
Set system latest maintenance date.
Format: (yyyy / mm / dd)
MUST be set after UPS installation
Battery Installed Date
Set battery installed date.
Format: (yyyy / mm / dd)
MUST be set after UPS installation
Battery Last Maintain
Date
Set battery latest maintenance date.
Format: (yyyy / mm / dd)
MUST be set after UPS installation
Baud Rate
--
Set COM Baud Rate:

2400 (Default)

4800

9600
Audible Alarm
--
Set Audible Alarm:

Disable

Enable (Default)
Factory Reset
--
Restore to factory default setting: refer to table 5-7.
EEPROM Reset
--
Restore EEPROM to default setting: refer to table 5-7.
EPO Function
--
Set EPO active status:

Normal Close Active

Normal Open Active (Default)
Password
--
Set New Password. 0000 (Default)
Save Settings
--
Save all settings to EEPROM.
Use this feature to save the setting(s) you have done.
Startup Screen
--
Set up initial screen (xxxxxxxxxxxx).
The max. length is 12 characters.