VARIO : Service & maintenance manual- rev. 4.2
Page 8.4
Figure 8.3-3
Proceed to adjust the belt, as indicated below:
3.
Loosen the ring nut
(b)
.
4.
Back off
(or screw)
the adjusting pin
(a)
until
the distance
(A)
of Figure 8.3-5
between the:
upper surface of the frame tube
and the
lower
surface of the swivel connector
is:
1000mm±1mm
(39.4”).
5.
Lock down the ring
(b)
again.
Figure 8.3-4
To adjust the belt on the opposite side:
rotate the pulley (X) 180°, insert the
4mm hexagonal wrench in the second
slot of the pulley and repeat the
operation at the point (1) of this
procedure.
Continued on following page...
Summary of Contents for Vario Excite + 500
