Technogym Vario Excite + 500, Service Maintenance Manual

Page: 186 / 220

VARIO : Service & maintenance manual- rev. 4.2
Page 9.6
9.1.13. M
ODIFIABLE TARGET FREQUENCIES
It is possible to enable or disable modification of the target heart rate during a constant heart rate
exercise. To change the selection, when the display shows the current setting:
HR : xxx
Press the
+/- GOAL number keys to select the desired option out of those listed in the table below:
HR
MODIFIABLE <default>
NON MODIFIABLE
9.1.14. E
NABLE CUSTOM MESSAGES
It is possible to configure whether a custom message is displayed when the machine is in the
standby state. To change the selection, when the display shows the current setting:
CUSTOM MESS. : xxx
Press the +/- GOAL number keys to select the desired option out of those listed in the table below:
CUSTOM MESS.
YES <default>
NO
9.1.15. R
ESETTING PARAMETERS TO DEFAULT VALUES
It is possible to reset the user menu parameters to their default values. To select the function, when
the display shows:
DEFAULT CONFIG.
Press
ENTER to confirm the operation, use the + or – effort level keys to move to the next or
preceding parameter. If the ENTER key is pressed the display will show:
CONFIRM ?
press
ENTER to confirm, or cancel by pressing the CLEAR key for a few seconds.