Technogym Vario Excite + 500, Service Maintenance Manual

Page: 127 / 220

VARIO : Service & maintenance manual- rev. 4.2
Page 7.27
7.7.2. D
ISASSEMBLING THE SIDE GUARDS
Figure 7.7-2
Carry out the procedure described in paragraph:
7.7.1. “Disassembling the centre guard”.
1.
Back off the screw (a) using a medium
Phillips screwdriver.
2.
Back off the screw (b) using a medium
Phillips screwdriver.
3.
Remove the rubberized guard (c) .
During reassembly, lock down or back
off the screw (b) to adjust the position
of the rubberized guard (c) relevant to
the inferior frame.
Figure 7.7-3
4. Back off the 2 screws (d) using a small
Phillips screwdriver.
Figure 7.7-4
5. Back off the screws (e) and (f) , using a 4mm
hexagonal wrench.
Continued on following page...