Technogym Vario Excite + 500, Service Maintenance Manual

Page: 164 / 220

VARIO : Service & maintenance manual- rev. 4.2
Page 7.64
7.19. DISASSEMBLING THE RIGID STOP AND THE LEVER
SHOCK ABSORBER
Figure 7.19-1
Carry out the procedure described in paragraph:
7.7.2. “Disassembling the side guards”.
1.
Raise the lever (a) in the direction of the
arrow and fix it.
For remove the shock absorber (X):
2.
Remove the yellow rubber shock absorber
(X) pulling slightly.
Figure 7.19-2
3. Back off the screw (b) using a 6mm
Hexagonal wrench, locking the nut on the
opposite side, using a 10mm wrench.
4.
Remove the bush (c) .
For remove the rigid stop (Y):
5.
Back off the screw (d) with a 5mm
Hexagonal wrench, lock down the opposite
nut using a 10mm wrench.
6.
Remove the rigid stop (Y).
To reassemble the rigid stop and the shock
absorber, carry out the above steps in reverse
order.