Technogym Vario Excite + 500, Service Maintenance Manual

Page: 193 / 220

VARIO : Service & maintenance manual- rev. 4.2
Page 9.13
9.3. SERVICE MENU CONFIGURATION: LED MODELS
The configuration procedure is invoked when the machine is in standby mode, using a different
procedure for the 500 and 700 models.
9.3.1. A
CCESSING CONFIGURATION OF
500
MODELS
Simultaneously press the ENTER ,
↑
, CLEAR keys. The following prompt appears on the display:
ENTER PASSWORD:
To access the procedure, type in the password
2501
which protects against unauthorized access and
press ENTER to confirm. To enter the password, increase or decrease the displayed value using the
↑
and
↓
keys, or use the +/- GOAL keys to scroll through and modify the individual digits.
At this point there are two options available:
↑
= Tech Config
↓
= Troubleshooting
Press numeric key
↑
to access the menu for configuring technical parameters ; the machine display
will begin showing the current configuration, structured as in the diagram below:
9.3.2. A
CCESSING CONFIGURATION OF
700
MODELS
The setup procedure of the equipment is activated when the machine is in Stand-by.
Simultaneously press the keys
369
for 700 models. The following prompt appears on the display:
ENTER PASSWORD:
To access the procedure, type in the password
2501 which protects against unauthorized access and
press the “Enter” key to confirm. At this point there are two options available:
1 = Tech Config
2 = Troubleshooting
Press numeric key 1 to access the menu for configuring technical parameters ; the machine display
will begin showing the current configuration, structured as in the diagram below: