Technogym Vario Excite + 500, Service Maintenance Manual

Page: 165 / 220

VARIO : Service & maintenance manual- rev. 4.2
Page 7.65
7.20. DISASSEMBLING THE BATTERY
Only for self-powered models (700SP).
Figure 7.20-1
Carry out the procedure decrypted at the
paragraph: 7.7.1. “Disassembling the centre
guard” and the: 7.7.3. “Disassembling the
bottom centre guard”.
1.
Disconnect the faston highlight in the figure
at the side.
2.
Back off the 2 screws (a) using a 6mm
Hexagonal wrench, locking the opposite
counter-nut using a 13mm wrench.
3.
Remove the battery (b) and its support.
If it is necessary to replace the battery,
cut the fixing cable tie.
To reassemble the battery, carry out the above
steps in reverse order.