Technogym Vario Excite + 500, Service Maintenance Manual

Page: 169 / 220

VARIO : Service & maintenance manual- rev. 4.2
Page 7.69
Figure 7.21-8
For remove the stator:
13.
Back off the 3 screws (l) using a 3mm
Hexagonal wrench.
14.
Remove the flange (m) .
The screws are the Loctite, be careful
when disassembling.
Figure 7.21-9
15. Now it is possible to remove the stator (n) .
Figure 7.21-10
To remove the copper disk:
13.
Back off the 6 screws (o) using a 4mm
Hexagonal wrench and remove the copper
disk
(p) , with careful.
CAUTION: During the reassembly
lock down the screws (o) using a
torque wrench settings to 6Nm.
To reassemble the flywheel group, stator and the
various components, carry out the above
steps in reverse order .