The parameter
index
indicates the number of the WEP key utilised (the permitted values are 1, 2, 3
and 4). If a WEP key is not used, enter 0. Only WEP open key mode is supported.
6.2.3.4 CHECKING CONNECTION TYPE
Command
Notes
Command
@RWIFICONFIG#
Displays SSID, password and type of encryp-
tion used by the configured access point.
Table 25
The parameter
ssid
indicates the name of the Wi-Fi network.
6.2.3.5 WRITING THE CONSOLE IP ADDRESS
Command
Notes
Command
@SIPADDRESS ipaddress#
Sets the console’s static IP address.
Table 26
The parameter
ipaddress
indicates the static IP address of the console.
6.2.3.6 WRITING THE GATEWAY ADDRESS
Command
Notes
Command
@SDEFGATEWAY gateway#
Sets the IP address of the default gateway.
Table 27
The parameter
gateway
indicates the value of the IP address of the default gateway.
Skillmill:
Technical Service Guide - Rev. 2.2
Page 43
e-mail:
Summary of Contents for Skillmill Console
