Technogym Skillmill Console, Technical Service Manual

Page: 67 / 76

9. SW UPDATE
1. Starting situation:
• PC (laptop) switched on;
• USB-MINI USB Cable.
2. Procedure:
• Disconnect the power supply cable (connect version) or switch off the battery (console version).
• Connect the PC to the console via the USB cable - mini USB.
• Press with a long press, within 5 seconds, the heart button on the console.
• An AUTOPLAY pop-up will appear on the PC for a USB thumb drive called “BOOTLOADER”.
Figure 12
3. If asked (depending on the operating system installed) “Do you want to repair the content?”
respond: “Continue without analysing”.
4. Connect the upgrade USB key to the PC as soon as synchronised (with PC Synch):
• Open the “Skillmill” folder on the synchronised USB key.
• Drag the SW (file with the .bin extension) to the equipment folder.
Skillmill:
Technical Service Guide - Rev. 2.2
Page 67
e-mail: support@technogym.com