Technogym Skillmill Console, Technical Service Manual

Page: 21 / 76

2.8 CABLES
The colour of the cables may change: in particular, refer to the Pin Out.
2.8.1 CU CABLES
CU0853: Cable A - Low Kit / UI board connection
(UI board connection / Patch connector)
UI board connection Signal Colour Patch connector
1 +5 Vdc Yellow 1
2 UI_TX Brown 2
3 UI_RX White 3
4 LKIT_RPM-SENSOR Green 4
5 GND_Power Grey 5
6 N.C. (Lkit_PedalSpeed) - -
CU0854: Cable A - TGS / NFC
(NFC / Patch connector)
NFC Board Signal Colour Patch connector
1 +3.3 Vdc NFC Yellow 1
2 rs232_RFID_RX Brown 2
3 rs232_RFID_TX White 3
4 - - -
5 - - -
6 - - -
7 - - -
8 DGND Green 4
CU0855: 5V power supply cable
(Power supply/ Low Kit)
Low Kit board Signal Colour 5V input JACK
1 5.5 Vdc Red 1
2 5.5 Vdc Red 1
3 GND Black 2
4 GND Black 2
- - 3
Skillmill:
Technical Service Guide - Rev. 2.2
Page 21
e-mail: support@technogym.com