Technogym Skillmill Console, Technical Service Manual

Page: 58 / 76

6.6 BRAKE TABLE CALIBRATION
• Disconnect the external power supply (Connect version) or switch off the battery (Console version);
• power the display with a PC or use a backup battery via the USB socket on the console;
• long press of keys 1-2-3 (they must be pressed when the time stops flashing);
CAL appears on the screen.
• position the lever on the lowest braking (lever towards the rear of the equipment);
• press the heart button, effort level indicated “0” will flash for a few moments and will become “1”;
• move the lever forward (one click);
• press the heart button, effort level indicated “1” will flash for a few moments and will become “2”;
• proceed to level 10;
• at the end of the procedure, END will appear and flash for a few moments;
• disconnect the USB socket from the console;
• reconnect the external power supply (Connect version) or switch on the battery (Console version).
Skillmill
Technical Service Guide - Rev. 2.2
Page 58 e-mail: support@technogym.com