Technogym Skillmill Console, Technical Service Manual

Page: 68 / 76

• Wait for the file to copy (approx. 10 seconds);
• Disconnect the MINI USB cable from the console, the console will turn off after a few sec-
onds.
• Repeat the operations described above for all the software to be installed.
5. Reposition the guard of the console's MINI USB connector.
The “Skillmill” folder contains two sub-folders:
• the sub-folder that contains 4 files applies to the Skillmill version Connect version. The SW has the
following structure :
high_kit_WFW----BA-----version;
wifi_WFW----CA-----version;
Low kit-----version;
Table-----version.
• the sub-folder that contains 3 files applies to the Skillmill version Console version. The SW has the
following structure :
high_kit_WFW----BA-----version;
Low kit-----version;
Table-----version.
Skillmill
Technical Service Guide - Rev. 2.2
Page 68 e-mail: support@technogym.com