Technogym Recline 500, Service Maintenance Manual

Page: 136 / 182

RECLINE EXCITE: Service & Maintenance Manual - rev. 2.4
Page 8.2
8.2. BELT TENSION
Figure 8.2-1
d in paragraph
.8. “Disassembling the guards”.
1.
ulley (see the square in the
2.
eccentric pin position and tight the screw
b .
Carry out the procedure describe
7
To adjust the belt alignment, pedal and
calibrate the eccentric pin position, using a
22-mm wrench, till the belt run in central
position of the p
picture to side);
place the locking plate
a so that it can lock
the