Technogym Recline 500, Service Maintenance Manual

Page: 131 / 182

RECLINE EXCITE: Service & Maintenance Manual - rev. 2.4
7.19. DISASSEMBLING THE HAND SENSOR BOARD
Only for 700i, 700i SP and 700iE models.
Figure 7.19-1
in paragraph
.18. “Disassembling the saddle”.
2. wo screws a using a 3-mm
. Remove the lever b .
Carry out the operations described
7
1. Place the saddle assembly on a work bench.
Back off the t
Allen wrench.
3
During reassembly, remember to fix the
ground cable using one of the two screws
“a”.
Figure 7.19-2
4. ng c . Release the spri
Figure 7.19-3
5. Back off the two screws d that are fixing the
board support to the frame, using a 2.5-mm
Allen wrench.
6. Cut the two cable ties e .
During reassembly, remember to fix the
cable on the hand sensor box, using two
cable ties.
Continued on following page
→
Page 7.37