Technogym Recline 500, Service Maintenance Manual

Page: 133 / 182

RECLINE EXCITE: Service & Maintenance Manual - rev. 2.4
7.20. DISASSEMBLING THE SADDLE HANDLEBARS
Figure 7.20-1
arry out the operations described in paragraph
1.
a of the hand sensor
2. Back off the screw b using a 3-mm Allen
wrench and unplug the ground cable.
C
7.19. “Disassembling the hand sensor board”.
Unplug the connectors
and the touch sensors (only for the 700i, 700i
SP and 700iE models).
Figure 7.20-2
3. Back off the two screws c using a 3-mm
Allen wrench and remove the covering plate.
Figure 7.20-3
ndlebar).
. Remove the handlebars taking care not to
damage the cables.
To re
the above steps in reverse order.
4. Back off the bolts d using an 8-mm Allen
wrench (two bolts for each ha
5
assemble the saddle handlebars, carry out
During reassembly, lock down the
screws “d” using a torque wrench set for
70 Nm.
Page 7.39