Technogym Recline 500, Service Maintenance Manual

Page: 72 / 182

RECLINE EXCITE: Service & Maintenance Manual - rev. 2.4
Page 6.12
Using a tester, check that all the output volt (3) ages on connector CN1 of the brake board are
correct, referring to paragraph 2.9. “Cables”.
) As for step (3) but on connector CN16 on the connector board.
) As for step (3) but on connector CN5 on the CPU board.
) As for step (3) but on connector CN1 on the LCD inverter board.
(7) d CN3 of the LCD inverter
board. The measured voltage should be approximately 380 VAC.
(4
(5
(6
Place the tester probes across the 2 pins of the connector CN2 an