Technogym Recline 500, Service Maintenance Manual

Page: 132 / 182

RECLINE EXCITE: Service & Maintenance Manual - rev. 2.4
Page 7.38
Figure 7.19-4
7. Back off the two screws f using a 17-mm
wrench.
8. Overturn the selector plate g .
Figure 7.19-5
9. Back off the two screws h using a 2.5-mm
Allen wrench.
Figure 7.19-6
10. Unplug the connector i from the board.
11. Release the 3 clips l and remove the board
from the box.
12. Unplug the connector m from the board.
To reassemble the hand sensor board, carry out
the above steps in reverse order.