Technogym Recline 500, Service Maintenance Manual

Page: 109 / 182

RECLINE EXCITE: Service & Maintenance Manual - rev. 2.4
7.3.3. 500
I AND
500
I
SP
VERSIONS
Figure 7.3-6
arry out the procedure described in paragraph C
7.1. “Disassembling the display”.
1. Unplug the keyboard connector indicated in
the figure.
Figure 7.3-7
Wit
T as
a or
. R lm from the adhesive.
. Apply the adhesive part, starting from the
l
be
3. In
display and connect it to the display board.
. Remove the protective film.
h the display placed on a work bench:
2. Use a sharp tool to lift up and detach a corner
of the keyboard.
o semble a new keyboard, with the display on
w k bench:
emove the backing fi 1
2
eft and working toward the right, without
nding the keyboard.
sert the connector in the special slot on the
4
When reassembling the keyboard, make
sure that none of the keys are bent or
remain pushed in.
The keyboard assembly procedure can
only be carried out once, because
disassembly damages the tracks and
keys.
Page 7.15