Technogym Recline 500, Service Maintenance Manual

Page: 54 / 182

RECLINE EXCITE: Service & Maintenance Manual - rev. 2.4
Page 4.8
Figure 4.5-6
16. Turn the machine over on the left side.
17. Back off the 4 screws
d using a Phillips
screwdriver.
18. Remove the cover e .
Figure 4.5-7
19. onnector plate f from the front
21.
arrow until it comes out on the display
side.
Remove c
platform.
20. Unplug CSafe connector g, if present.
Insert cable 8 (CB-18) into the hole indicated
by the
Because the display column is
interrupted, as can be seen in Figure
4.5-10, it will be difficult for the cable to
reach the display. Therefore, route it
along at least the first section of column.
Figure 4.5-8
22. Assemble union connector 7 on connector
plate 6 , securing it with its own lock-nut after
inserting the washer, as shown in the figure.
Continued on following page
→