Technogym Recline 500, Service Maintenance Manual

Page: 116 / 182

RECLINE EXCITE: Service & Maintenance Manual - rev. 2.4
Page 7.22
7.8. DISASSEMBLING THE GUARDS
Figure 7.8-1
Carry out the procedure described in paragraph
7.7. “Disassembling the pedals and the pedal
cranks”.
1. Back off the 7 screws
a on either side of the
machine using a 4-mm Allen wrench.
Figure 7.8-2
first.
. Remove the seven pins c from the left guard.
o reassemble the guards, carry out the above
step
2. Remove the right guard
3
4. Remove the left guard.
T
s in reverse order.
g reassembly, lock down the
screws using a torque wrench set for 0.8
Nm.
Durin