TechnipFMC Sening MultiLevel, Instruction Manual

Page: 86 / 230

Page 86 • MNF18001EN / DOK-479-E ║ Issue/Rev. 1.4 (9/18)
3132139 – Max. Switch Point
• During filling, overfilling individual compartments should be avoided.
• The Loading pre-switching is to operate separately for each compartment.
Tripping the Loading pre-switching for a particular (overfilled) compartment has
no effect on current filling operations of other compartments.
• When an adjustable limit value (“Max. Switch point”) is reached/exceeded,
the foot valve for the corresponding compartment is closed.
• Any change to the
“Max. Switch point” parameter is noted in the parameter
logbook.
• After overfilling and switch-off, the overfilled compartment remains blocked
(interlocked) against further filling attempts, even if the fill level should fall again.
• The interlock is cancelled only when exiting filling mode.
• If a compartment has been locked (overfilled) this condition is shown on the
display.
• For NOMIX operation: filling mode = chamber (set in NOMIX!)
The first time crossing: The bottom valve is closed and the loading can not be
restarted.
Parameter = Volume VT
Overfill =
^^^
to the right of the display chamber number
→ value in liters
→ value = 0 means Loading pre-switching is disabled.
Display during loading (page 1)
Compartment 1
- empty
- Foot valve closed
Compartment 2
- Filling underway
- Gauge moving
- Foot valve closed
Compartment 3
- Filled
- Foot valve closed
Display during loading (page 2)
Compartment 1
- empty
- Foot valve closed
Compartment 2
- Filling underway
- Gauge moving
- Foot valve closed
Compartment 3
- Filled
- Foot valve closed
MultiLevel Instruction Manual MENU structure