Issue/Rev. 1.4 (9/18) ║ MNF18001EN / DOK-479-E • Page 77
9.6.
Display of the loading plan – 2
Loading plan display with NoMix
If MultiLevel is operated together with
NoMix, only the fill levels and the product
can be read off here in the loading plan
display. Changes are not possible.
Loading plan display in stand-alone mode
In stand-alone mode on the other hand,
the I/O interface (chapter 7.8 "I/O
interface - NM2IO") is connected directly
to the MultiLevel for the control of the foot
and line valves.
For more information about stand-alone
mode, refer to chapter 7.1.6 "Stand-alone
mode".
The loading plan must now be entered
manually. The compartments can be
selected with the
<numeric keys> <1>
to <x>
and the product adapted accordingly.
Product selection in stand-alone mode
The product for the selected compartment
can then be selected with the
<numeric
keys> <1>
to
<9>
according to the
specified values.
MultiLevel Instruction Manual
MENU structure
Summary of Contents for Sening MultiLevel
