TechnipFMC Sening MultiLevel, Instruction Manual

Page: 105 / 230

Issue/Rev. 1.4 (9/18) ║ MNF18001EN / DOK-479-E • Page 105
9.7.3.1. Wetleg-IF – 334
The parameters for the wet-leg detector interface can be set here:
*3341 – Activation time
Time delay between wet-leg detector
report from Empty to Full and the time
at which this change is evaluated.
→ The factory setting is '7'
→ value in s
*3342 – Deactivation time
Time delay between wet-leg detector
report from Full to Empty and the time
at which this change is evaluated.
→ The factory setting is '30'
→ value in s
*3343 - Second detector
Activation of a second Wetleg detector. This setting is after the reporting of an
old parameter set 'No'.
The selection options are:
- 'No'
- 'In pipework'.
→ The factory setting is 'No'
9.7.4. Form Description – 34
The operation of a level sensor system requires a series of forms for different printing tasks.
The delivery note in particular is subject to individual user requirements and is therefore
flexible in design. The forms can be adjusted and changed here via the menu:
More detailed information on the form description can be found in chapter 10
"Form layout".

Form description selection menu
<1>
= new / change page layout
<2> = print test receipt
<3> = print elements
For more detailed information see:
Overview of the possible receipt
elements: chapter 10.2.1 "Identifier - ID
for type of receipt element".
MultiLevel Instruction Manual MENU structure