TechnipFMC Sening MultiLevel, Instruction Manual

Page: 100 / 230

Page 100 • MNF18001EN / DOK-479-E ║ Issue/Rev. 1.4 (9/18)
*31545 – Sens. Correction Pitch
Each inclination sensor is pre-checked for accuracy and reproducibility in the
works by the Office of Weights and Measures. Since the actual inclination
sensor chip in the housing can be never installed exactly in the 0-position, the
correction value in the longitudinal direction is recorded and entered on the
pre-acceptance test certificate.
→ This value from the pre-acceptance test certificate must be entered here.
*31546 – Sens. Correction Roll
Proceed as for the sensor correction value in the longitudinal direction: See
above!
*31547 – Inst. Correction Pitch
The semitrailer is placed as accurately as possible in the 0° position in a longitu-
dinal direction prior to the calibration. (The 0° of the tank is described in the tank
approval). The inclination sensor, which is firmly connected to the tank, will indi -
cate a somewhat different value. This is the installation error in the longitudinal
direction, which must be corrected. The value displayed in the Diagnosis menu
must be entered here as a negative installation correction for the pitch.
*31548 - Inst. Correction Roll
Proceed as for the installation correction value in the longitudinal direction: See
above!
9.7.1.5.2. Printing – 3155
Additional calibration-relevant parameters concerning the receipt printout are listed here:
*31551 – Minimum Form
Minimum requirement of the weights
and measures authority for a printed
receipt; list of the minimum required
form elements.
*31552 – Decimal Separator
Selection of the decimal separator.
Possible values:
→ Comma
→ Point
9.7.1.5.3. Device Info – 3156
Further device-specific settings are made here:
*31561 - Device number
Entry, for example, of the serial number
of the MultiLevel central unit. This is
additionally stored internally, where it
cannot be changed, and appears on
parameter and seal printouts as ‘Ser. no.’
*31562 – Tank number
The measuring tank serial number |
can be entered in this field.
*31563 - Truck ID
The registration number of the semitrailer can be entered in this field.
MultiLevel Instruction Manual MENU structure