TechnipFMC Sening MultiLevel, Instruction Manual

Page: 11 / 230

Issue/Rev. 1.4 (9/18) ║ MNF18001EN / DOK-479-E • Page 11
MultiLevel Instruction Manual Installation
2.4.3. Operating elements
CAUTION:
Do not open the housing cover when the unit is connected to the voltage
supply! Work must only be carried out on the Ex-e terminals when the unit is
voltage free. National regulations must be satisfied when operating this unit.
When performing operational checks, observe the guidelines laid out in IEC /
EN 60 079-17.
2.4.4. Disposal
It is the operator’s responsibility to obtain the necessary information about all relevant
regulations and requirements from your local authorities. Ensure that the relevant materials
are disposed of in an environmentally safe fashion.
The operator is responsible for ensuring compliance with all general and local
regulations which are in force at the time of disposal.
2.4.4.1. Disposal of production materials and auxiliary materials
• Mineral oil products are extremely hazardous to the environment; they must not be
allowed to enter the drains/sewage system or the ground.
• These materials and any objects contaminated with them should be disposed of via
suitable waste disposal facilities.
CAUTION:
The batteries in the controller should be replaced by a skilled person. Used
batteries must not be disposed of as standard domestic waste. Ensure that all
used batteries are disposed of via suitable disposal facilities.
2.4.4.2. Disposal of a functional component or system
• When a functional component or system is taken out of service, we recommend that it
should be sorted into its different types of waste and then disposed of or recycled as
appropriate. Sort and separate iron, nonferrous metals, plastics, electronic waste, etc.
• Fuels, grease, oil and objects or lines contaminated with them must be disposed of
separately.