TechnipFMC Sening MultiLevel, Instruction Manual

Page: 101 / 230

Issue/Rev. 1.4 (9/18) ║ MNF18001EN / DOK-479-E • Page 101
9.7.2. Printer Settings – 32
Printer-specific parameters can be set here:
The factory setting should be changed only after consulting F.A. Sening!
321 – Printer selection
Various printer types can be set here:
DR-295
DR-298
DR-220
ESC/P
ESC/P2
ASCII
User defined
No printer
9.7.2.1. Interface – 322
Interface-specific parameters can be set here:
3221 – Port Number
The interface no. is set here. ‘COM1’ or
‘COM2’ can be selected.
→ The factory setting is ‘COM1’
3222 – Interface
The type of interface is set here. ‘RS232’
or ‘RS485’ can be selected.
→ The factory setting is ‘RS232’
3223 – Transfer Rate
The following data rates can be set:
1200; 2400; 4800; 9600, 19200; 38400; 57600; 115200.
→ The factory setting is ‘9600’.
3224 – Parity check
The parity check is set here:
• none
• odd
• even
→ The factory setting is ‘even’
MultiLevel Instruction Manual MENU structure