SYSTEM COMMANDS
770
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
system ra config
Configure remote access parameters.
SYNTAX:
system ra config
name = <{}>
[state = <{disabled|enabled}>]
[secure = <{enabled|disabled}>]
[port = <{enabled|disabled}>]
[timeout = <led|disabled}>]
[mode = <{Permanent|Temporary|Schedule}>]
[ipintf = <string>]
[randompassword = <{enabled|disabled}>]
[randomport = <{enabled|disabled}>]
[group = <string>]
[user = <string>]
[todschedule = <string>]
[systemservice = <{GUI|webservice}>]
where:
name
Instance name
REQUIRED
state
Enable/disable RAD.
OPTIONAL
secure
Use secure mode (https).
OPTIONAL
port
The port number.
OPTIONAL
timeout
The timeout value.
OPTIONAL
mode
Mode Permanent or Temporary.
OPTIONAL
ipintf
The name of the xref to the IP interface.
OPTIONAL
randompassword
Create a random password.
OPTIONAL
randomport
Use a random port.
OPTIONAL
group
The name of the xref to the group keypath.
OPTIONAL
user
The name of the xref to the user keypath.
OPTIONAL
todschedule
The name of the xref to the ToD schedule.
OPTIONAL
systemservice
The system service type.
OPTIONAL