FIREWALL COMMANDS
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
441
firewall debug traceconfig
Display/Modify firewall trace configuration.
SYNTAX:
firewall debug traceconfig
[tcpchecks = <{disabled|enabled}>]
[udpchecks = <{disabled|enabled}>]
[icmpchecks = <{disabled|enabled}>]
[sink = <{none|all|accept|deny|drop|reset} or
number>]
[forward = <{none|all|accept|deny|drop|reset}
or number>]
[source = <{none|all|accept|deny|drop|reset}
or number>]
where:
tcpchecks
Disable/Enable tcpchecks traces.
OPTIONAL
udpchecks
Disable/Enable udpchecks traces.
OPTIONAL
icmpchecks
Disable/Enable icmpchecks traces.
OPTIONAL
sink
The action the firewall traces for sink traffic.
OPTIONAL
forward
The action the firewall traces for forward traffic.
OPTIONAL
source
The action the firewall traces for source traffic.
OPTIONAL