NAT COMMANDS
654
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
nat tmpladd
Add an address mapping template.
SYNTAX:
nat tmpladd
[intf = <{loop|Internet|LocalNetwork}>]
[group = <{wan|local|lan|tunnel|dmz|guest} or
number>]
[timeout = <number{0-65535}>]
[type = <{napt|nat}>]
outside_addr = <ip-range>
[inside_addr = <ip-range>]
[access_list = <ip-range>]
[foreign_addr = <ip-range>]
[protocol = <{ah|egp|esp|ggp|gre|hmp|icmp|
igmp|pup|rdp|rsvp|tcp|udp|vines|xns-idp|6to4|
ipip} or number>]
[outside_port = <port-range>]
[inside_port = <port-range>]
[mode = <{auto|inbound|outbound}>]
[weight = <number{0-255}>]
[status = <{up|down}>]
where:
intf
The IP interface name scope for this template.
OPTIONAL
group
The IP interface group scope for this template.
OPTIONAL
timeout
Lifetime (seconds) for this template.
OPTIONAL
type
The type of template.
OPTIONAL
outside_addr
The outside (typically public) IP address or index (range for
NAT).
REQUIRED
inside_addr
The inside (typically private) IP address or index (range for
NAT).
OPTIONAL
access_list
The range of inside addresses the template is restricted to.
OPTIONAL
foreign_addr
The range of destination addresses the template is restricted
to.
OPTIONAL
protocol
The IP protocol.
OPTIONAL
outside_port
The outside port number or range (only for NAPT).
OPTIONAL
inside_port
The inside port number or range (only for NAPT).
OPTIONAL
mode
The mode to create the portmap.
OPTIONAL
weight
The weight to be used for the template instance(s).
OPTIONAL
status
The administrative state of template.
OPTIONAL