ENV COMMANDS
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
295
env unset
Deletes an environment variable.
SYNTAX:
env unset
var = <{_SW_FLAG|_ETHERNET|_COMPANY_NAME|
_COMPANY_URL|_PROD_NAME|_SSID_SERIAL_PREFIX|
_BOARD_SERIAL_NBR|_PROD_SERIAL_NBR|_FII|
_BUILD|_BOOTLOADER_VERSION|_BUILDVARIANT|
_OUI|_BUILD_PASSIVEBANK|_CUSTOVARIANT|
_PHYSLAYERTYPE|_BUILDNAME|_PRL|_FIA|
_BOARD_NAME|_COMPANY_ID|_COPYRIGHT|_TPVERSION|
_PROD_ID|_PROD_FRIENDLY_NAME|_VARIANT_ID|
_VARIANT_FRIENDLY_NAME|_MACADDR|_LMACADDR|
_WL_VERSION_0|_WL_VERSION|_WL0_WEPKEY_SERIAL|
_WL0_WPAKEY_SERIAL|_WL0_SSID_SERIAL|
_WL0_SSID_PREFIX|_WL0_BASE52_SERIAL|
_WL0_MAC_POSTFIX|_WL0_PIN_SERIAL|
_WL0_UUID_E_SERIAL|_WL0_UUID_R_SERIAL|
_WL1_WEPKEY_SERIAL|_WL1_WPAKEY_SERIAL|
_WL1_SSID_SERIAL|_WL1_BASE52_SERIAL|
_WL1_PIN_SERIAL|_WL1_UUID_E_SERIAL|
_WL1_UUID_R_SERIAL|_WL2_WEPKEY_SERIAL|
_WL2_WPAKEY_SERIAL|_WL2_SSID_SERIAL|
_WL2_BASE52_SERIAL|_WL2_PIN_SERIAL|
_WL2_UUID_E_SERIAL|_WL2_UUID_R_SERIAL|
_WL3_WEPKEY_SERIAL|_WL3_WPAKEY_SERIAL|
_WL3_SSID_SERIAL|_WL3_BASE52_SERIAL|
_WL3_PIN_SERIAL|_WL3_UUID_E_SERIAL|
_WL3_UUID_R_SERIAL|_SSID_WL_MACADDR_POSTFIX|
_SSID_POSTFIX_LEGACY_OR_MAC|
_WL_MACADDR|_LWL_MACADDR|_MODEMLABEL|
_WIZ_AUTOPOPUP|_SNTPPOLL_POST_SYNC|
_SNTPPOLL_PRE_SYNC|_ADSL_EOC_VERSION|
_EOC_MSG|CONF_REGION|CONF_PROVIDER|
CONF_DESCRIPTION|CONF_SERVICE|CONF_DATE|
HOST_SETUP|CONF_DATETIME|CONF_TPVERSION|
@CWMPUSER|WL0_SSID_PREFIX_CUSTOM|
@WL1_SSID_PREFIX_CUSTOM|
@WL2_SSID_PREFIX_CUSTOM|
@WL3_SSID_PREFIX_CUSTOM|@WL0_SSID|@WL1_SSID|
ACS_URL}>
where:
var
The name of the variable.
REQUIRED