SNTP COMMANDS
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
739
sntp debug traceconfig
Modify SNTP client trace configuration
SYNTAX:
sntp debug traceconfig
[state = <{disabled|enabled}>]
Displays the software version. = <{disabled|
enabled}>
where:
state
Enable/Disable tracing.Command: software version
OPTIONAL
Displays the software version.
Syntax : version
REQUIRED