ETH COMMANDS
326
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
eth bridge ifconfig
Modify a bridge interface configuration.
SYNTAX:
eth bridge ifconfig
[brname = <{bridge}>]
intf = <{OBC|ethport1|ethport2|ethport3|
ethport4|WLAN|virt}>
[dest = <{}>]
[portstate = <{disabled|learning|forwarding}>]
[retry = <number{0-65535}>]
[priotag = <{disabled|enabled}>]
[vlan = <{default}>]
[prioconfig = <{disabled|overwrite|increase}>]
[ipprec = <{disabled|precedence|dscp}>]
[priority = <number{0-7}>]
[regenprio = <string>]
[ingressfiltering = <{disabled|enabled}>]
[acceptvlanonly = <{disabled|enabled}>]
[mcastfilter = <{disabled|enabled}>]
[dynvlan = <{disabled|enabled|switched}>]
[wan = <{disabled|enabled}>]
[igmpsnooping = <{disabled|enabled}>]
[priotransparent = <{disabled|enabled}>]
[bpdufiltering = <{disabled|enabled}>]
[xtratagging = <{none|c-vlan|s-vlan}>]
where:
brname
The name of a bridge instance.
OPTIONAL
intf
The name of the bridge interface to configure.
REQUIRED
dest
The destination for this interface. Typically an ATM or a
physical interface name.
OPTIONAL
portstate
The bridge portstate for this interface.
OPTIONAL
retry
The number of WAN connection setup retries before giving
up.
OPTIONAL
priotag
Enable/Disable priority tagging.
OPTIONAL
vlan
The default VLAN.
OPTIONAL
prioconfig
The priority configuration for this interface.
OPTIONAL
ipprec
The IP precedence for this interface.
OPTIONAL
priority
The default priority for untagged ingress packets.
OPTIONAL
regenprio
The priority regeneration table for tagged ingress packets.
OPTIONAL
ingressfiltering
Enable/disable discard of tagged ingress packets if the
interface is not part of the VLAN.
OPTIONAL