ATM COMMANDS
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
37
atm oam cc modify
Modify CC on the connection.
SYNTAX:
atm oam cc modify
port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or
number>
vpi = <number{0-31}>
[vci = <number{0-511}>]
[transmit = <{disabled|enabled}>]
[receive = <{disabled|enabled}>]
[auto = <{disabled|enabled}>]
[span = <{segment|end2end}>]
where:
port
The ATM port number.
REQUIRED
vpi
The Virtual Path Identifier.
REQUIRED
vci
The Virtual Channel Identifier.
OPTIONAL
transmit
Enable/disable transmission of CC cells.
OPTIONAL
receive
Enable/disable loss of continuity.
OPTIONAL
auto
Enable/disable remote CC activation/deactivation.
OPTIONAL
span
End2end or segment continuity check.
OPTIONAL