ETH COMMANDS
404
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
eth switch qos config
Configure common qos parameters.
SYNTAX:
eth switch qos config
state = <{enabled|disabled}>
[nbrOfQueues = <number{0-4}>]
[realtime = <{enabled|disabled}>]
[threshold = <number{0-15}>]
[rxbackpressure = <{disabled|enabled}>]
[txbackpressure = <{disabled|enabled}>]
where:
state
Enable/disable QoS.
REQUIRED
nbrOfQueues
Number of queues.
OPTIONAL
realtime
Enable/disable realtime.
OPTIONAL
threshold
Tx Qos threshold.
OPTIONAL
rxbackpressure
Enable/disable controlled receive from switch (OBC pauses
Rx).
OPTIONAL
txbackpressure
Enable/disable controlled transmit to switch (switch pauses
Tx).
OPTIONAL