ETH COMMANDS
320
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
eth bridge filter ifadd
Connect an interface with a filter.
SYNTAX:
eth bridge filter ifadd
brname = <{bridge}>
name = <{}>
intf = <{OBC|ethport1|ethport2|ethport3|
ethport4|WLAN|virt}>
where:
brname
The name of an bridge.
REQUIRED
name
The name of the filter to configure.
REQUIRED
intf
The name of the bridge interface to add.
REQUIRED