FIREWALL COMMANDS
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
451
firewall rule debug clear
Clear rule statistics.
SYNTAX:
firewall rule debug clear
[chain = <chain name>]
[index = <number>]
Show the current routes in the grp routing
table. = <number>
where:
chain
The name of the chain.
OPTIONAL
index
The index of the rule in the chain.Command: grp rtlist
OPTIONAL
Show the current routes in the grp
routing table.
Syntax : rtlist [dst = <ip-address>] [dstmsk = <ip-mask(dotted
or cidr)>]
REQUIRED
SYNTAX:
firewall rule debug clear
[dst = <ip-address>]
[dstmsk = <ip-mask(dotted or cidr)>]
where:
dst
The destination IP address using this route. Supports ip/
mask notation.
OPTIONAL
dstmsk
The destination IP address mask.
OPTIONAL