ETH COMMANDS
414
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
eth switch storm ifconfig
Configure per port storm control parameters.
SYNTAX:
eth switch storm ifconfig
port = <number{1-4}>
[state = <{enabled|disabled}>]
[rate = <number{0-1000}>]
[burstsize = <{16|20|28|40|76|140|268|500}>]
[broadcast = <{enabled|disabled}>]
[multicast = <{enabled|disabled}>]
[unknown = <{enabled|disabled}>]
where:
port
The port.
REQUIRED
state
Enable/disable storm control.
OPTIONAL
rate
Rate in 10ths of percent.
OPTIONAL
burstsize
Burst size in KBytes.
OPTIONAL
broadcast
Storm control for broadcast traffic.
OPTIONAL
multicast
Storm control for multicast traffic.
OPTIONAL
unknown
Storm control for traffic with unknown destination address.
OPTIONAL