ETH COMMANDS
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
423
intfgroup [!]
The IP interface group.
If a value is preceded by a “!”, it means NOT.
OPTIONAL
tos [!]
The Type Of Service specification in the IP packet.
If a value is preceded by a “!”, it means NOT.
OPTIONAL
precedence [!]
The precedence in the IP packet (part of tos).
If a value is preceded by a “!”, it means NOT.
OPTIONAL
dscp [!]
The diffserv code point in the IP packet (part of tos).
If a value is preceded by a “!”, it means NOT.
OPTIONAL
proto [!]
The IP protocol (name or number) in the IP packet.
If a value is preceded by a “!”, it means NOT.
OPTIONAL
srcport [!]
The TCP/UDP source port number or range begin.
If a value is preceded by a “!”, it means NOT.
OPTIONAL
srcportend
The source TCP/UDP source port range end. (inclusive)
OPTIONAL
dstport [!]
The TCP/UDP destination port number or range begin.
If a value is preceded by a “!”, it means NOT.
OPTIONAL
dstportend
The TCP/UDP destination port range end.
OPTIONAL
icmptype [!]
The ICMP type (name or number) of the packet.
If a value is preceded by a “!”, it means NOT.
OPTIONAL
icmpcode [!]
The ICMP code or range begin.
If a value is preceded by a “!”, it means NOT.
OPTIONAL
icmpcodeend
The ICMP code range end. (inclusive)
OPTIONAL
iplengthmin [!]
The minimum IP length in bytes (header inclusive).
If a value is preceded by a “!”, it means NOT.
REQUIRED
iplengthmax
The maximum IP length including header in bytes (header
inclusive).
OPTIONAL