ETH COMMANDS
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
409
eth switch shaper ifconfig
Configure per port shaper parameters.
SYNTAX:
eth switch shaper ifconfig
port = <number{1-4}>
ingress = <{enabled|disabled}>
shaper = <number{0-1}>
[state = <{enabled|disabled}>]
[speed = <number{64000-1000000000}>]
[burstsize = <{16|20|28|40|76|140|268|500}>]
where:
port
The port.
REQUIRED
ingress
Ingress port = enabled; egress port = disabled.
REQUIRED
shaper
The shaper instance.
REQUIRED
state
Enable/disable shaping.
OPTIONAL
speed
Speed in bits/sec.
OPTIONAL
burstsize
Burst size in KBytes.
OPTIONAL