100BASE-T1 SPY 12 Port
User Manual
22
Warning
: When a test mode has been selected there is no communication possible for
this port.
Note
: For compliance testing an oscilloscope with special test software is necessary.
Output to:
The BroadR_Reach Ports are always connected A-B for each channel pair.
This setting allows a copy of the A-B communication to be sent to a Gigabit port.
Choose here which Gigabit port will be connected with the selected BroadR-Reach
port.
BR PAIR ID:
Specifies the multiplexing between two BroadR-Reach ports. For example,
if the user wants to connect BR-1A with BR-5A,
BR PAIR ID
in both ports must have the
same value.
Note
: If more than two BroadR-Reach ports have the same
BR PAIR ID
, only the two
first ports found following the order 1A, 1B, 2A, 2B… will be connected. For example, if
BR-1A, BR-1B and BR-2A have the same
BR PAIR ID
, only BR-1A and BR-1B will be
connected between them.
Note
: The
BR
PAIR
ID
value must be greater than 0. If two BroadR-Reach ports have
this field set to 0, those ports will be not connected.
SLEEP FOR PAIR:
when the user selects this option, two textboxes will appear:
•
Sleep Time (ms):
time that the master-ECU has to be sleeping (no lunkup on
BroadR-Reach link) for the 100BaseT1_SPY to deactivate the link with the slave-
ECU
•
Wake-up Time (ms):
time needed after disabling the link with the slave-ECU to
be possible to detect a linkup with the master-ECU
