100BASE-T1 SPY 12 Port
User Manual
16
3.3
Control Panel Tab
Figure 3-4: Details in the Control Panel Tab
On the „Control Panel“ tab
the user can make a soft-reset
(Restart)
of the system.
Also the configuration settings of the device can be
imported
and
exported
to a file
(*.cfg) on a computer connected to the RJ45 Port. The user must restart the device to
use the new configuration.
The user can reset the configuration settings to
Default.
All the configuration stored
will be set to its default values.
After one minute without linkup in any of the 100BaseT1 ports, the device will enter on
Sleep Mode. In order to wake up the device again, the user can use the WakeUp line or
power off the device. Another way to avoid the device enter on this Sleep Mode is to
activate the
Prevent sleep
checkbox. This will keep the device running without entering
on the Sleep Mode.
