100BASE-T1 SPY 12 Port
User Manual
25
Bit Rate:
Allows to select the CAN 2.0. Bit Rate. Available options: 62500bps, 100kbps,
125kbps, 250kbps, 500kbps, 1Mbps.
When nonISO or ISO CAN-FD types are selected, the
FD Rate
will be selectable. In CAN-
FD, the
Bit Rate
determines the Arbitration-Phase Bit Rate in CAN-FD protocol, while
the FD Rate determines the Data-Phase Bit Rate in CAN-FD protocol. The available
options in FD Rate are 2Mbps and 5Mbps.
Figure 3-12: CAN Type ISO CAN-FD in CAN Port A
Bit sample
and
FD sample point:
These two options allow the user to configure the
sample points for the selected CAN Type protocol. In the case of
nonISO
or
ISO CAN-
FD, FD sample
point will appear, in order to select the data phase sample point
. Bit
sample point
will be applied for CAN2.0 or the arbitration phase on CAN-FD.
Note:
The CAN ports are able to work like receivers and transmitters.
Note:
Please set the
Bit Rate
,
FD Rate
and the sample points to the same value of what
the device is connected to this port.
Note:
The
Bit sample point
is in the range [51, 90]. For
FD sample point
, the range is
[51, 85] for
FD Rate
2Mbps. For
FD Rate
5Mbps, only two FD sample points will be
