100BASE-T1 SPY 12 Port
User Manual
56
Flash erased
Loading file...
tftpServer: 192.168.0.49 requested file redboot.srec
[****************************************]
TFTP transfer finished
File loaded successfully
Run application...
++++++++++++++++++++++++++++++++++++++++++++++++++++++++
NEW Bootloader Version:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Connecting to 192.168.0.49:9000 (1).
Connected
Sending ^C
Non-certified release, version 2.0 - built 17:04:51, Aug 19 2015
Connecting to 192.168.0.49:9000 (1).
Connected
Sending ^C
Testing TFTP server
tftpServer ready. Port: 69
tftpServer: 127.0.0.1 requested file microcontroller.crc.srec
[****************************************]
TFTP server ok
Loading test file...
TFTP transfer finished
tftpServer: 192.168.0.49 requested file microcontroller.crc.srec
[***TFTP transfer finished ]
Test File loaded successfully
Updating application
Erasing flash...
Flash erased
Loading file...
tftpServer: 192.168.0.49 requested file microcontroller.crc.srec
[****************************************]
TFTP transfer finished
File loaded successfully
Connecting to 192.168.0.49:9000 (1).
Connected
Sending ^C
Testing TFTP server
tftpServer ready. Port: 69
tftpServer: 127.0.0.1 requested file spy.srec
[****************************************]
TFTP server ok
Updating FPGA
Erasing flash...
TFTP transfer finished
Flash erased
Loading file...
tftpServer: 192.168.0.49 requested file spy.srec
[****************************************]
TFTP transfer finished
File loaded successfully
Connecting to 192.168.0.49:9000 (1).
Connected
Sending ^C
Run application at address 0x1006b40...
Drücken Sieeine beliebige Taste . . .
In the case that the IP Address of the device is changed, the user can restore the IP to
the default one following the next steps:
1.
Follow steps 1 to 7 described before.
2.
Open a DOS-Box in Administrator mode and go to the local folder where the
firmware ZIP files were extracted.
